Elephant Fluid Power Co., Ltd.
Elephant Fluid Power Co., Ltd.

Precautions For The Use Of Kawasaki Hydraulic Pump

Standardized and safe use of hydraulic pump can greatly reduce the safety hazards of the hydraulic system and improve the stability of the hydraulic system, so what are the precautions to be paid attention to in the use of kawasaki hydraulic pump? Today, Elephant Fluid Power has listed some things to pay attention to after replacing the hydraulic pump, hoping to help you use the hydraulic pump.


1. When the hydraulic pump starts, it should first be clicked several times, and after the oil flow direction and sound are normal, it should run at low pressure for 5 to 10 minutes, and then put into normal operation. Before the plunger pump starts, the pump must be filled with clean working oil through the oil drain on the shell.


2, the viscosity of the oil is affected by the temperature and changes, the oil temperature increases viscosity decreases, so the oil temperature is required to remain below 60 ° C, in order to make the hydraulic pump can work stably at different working temperatures, the selected oil should have the viscosity affected by temperature changes less oil temperature characteristics, as well as better chemical stability, anti-foam performance.


3, the oil must be clean, must not be mixed with mechanical impurities and corrosive substances, the hydraulic system without filtration device on the suction pipeline, must be refueled to the tank by the oil filter truck (filtration accuracy is less than 25μm).


4. The maximum pressure and maximum speed of the hydraulic pump refer to the peak allowed in a short period of time in use, and long-term use should be avoided, otherwise it will affect the life of the hydraulic pump.


5, the normal working oil temperature of the hydraulic pump is 15 ~ 65 °C, the maximum temperature on the pump casing is generally 10 ~ 20 °C higher than the oil temperature at the pump inlet in the tank, when the oil temperature in the tank reaches 65 °C, the maximum temperature on the pump casing does not exceed 75 ~ 85 °C.


In addition, it should be noted that if you are installing kawasaki hydraulic parts for the first time, you need to check in advance to eliminate risks and ensure that the use environment is safe and stable. Within three months of the operation of the new machine, attention should be paid to the operation of the machine, such as the maintenance of the parts, whether the screws are loose, whether there is abnormal noise, and so on.


Kawasaki hydraulic pump precautions in the above article content has been listed for everyone, if you have other want to know the content, you can contact Elephant Fluid Power, their official website is https://www.heavyequipmentmaintain.com/. Elephant Fluid Power is a company specializing in the production of hydraulic products, with high-quality products, reasonable prices and thoughtful service, now the company has become a leading brand in the field of hydraulics, Elephant Fluid Power production of hydraulic products and models are complete, the products on the market can basically be produced. And their staff are very professional, knowledgeable and patient, treat all guests equally, so if you have any doubts, please contact them quickly!





kawasaki hydraulic pump distributors

kawasaki hydraulic pump usa

kawasaki hydraulic pump repair manual

kawasaki hydraulics distributors

kawasaki hydraulic pump parts

kawasaki pumps usa

kawasaki hydraulics usa

kawasaki hydraulics plymouth