A10VSO100 pump made in China

A10VSO100 is a common axial piston variable displacement pump widely used in various hydraulic systems. In China, many hydraulic component manufacturers produce this pump to meet the needs of the domestic market. This article will conduct an in-depth analysis of the A10VSO100 pump made in China, including its structure, working principle, common faults and maintenance.

The main components of the A10VSO100 pump include

Cylinder body accommodates the piston and cylinder barrel and withstands high pressure.

Swash plate controls the angle of the piston and adjusts the output of the oil pump.

Port plate guides the flow direction of hydraulic oil.

Piston and shoe assembly converts the rotational motion of the swash plate into linear motion of the piston.

Bearing assembly supports rotating parts and reduces friction.

Shaft transmits power.

Seal prevents internal leakage.

Working principle

By rotating the swash plate, the relative position between the piston and the cylinder barrel is changed, thereby changing the output flow and pressure of the pump. The port plate controls the inflow and outflow direction of the hydraulic oil.

Common faults and causes

Leakage aging and damage of seals, wear of cylinders, wear of distribution plates, etc.

Excessive noise bearing damage, gear wear, cavitation, foreign matter entering the pump body, etc.

Insufficient flow or insufficient pressure swash plate stuck, distribution plate wear, oil suction line blockage, hydraulic oil pollution, etc.

Overheating hydraulic oil viscosity is too high, cooling system failure, excessive load, etc.

Maintenance steps

Disassembly cut off the power supply, release the pressure, and disassemble the pump body in sequence.

Cleaning Use detergent and compressed air to thoroughly clean each component.

Inspection Check the wear and measure the clearance.

Replacement Replace damaged parts.

Assembly Assemble in sequence, pay attention to the tightening torque.

Debugging Connect the pipeline, inject hydraulic oil, start at low speed, and gradually increase the speed and pressure.

Maintenance precautions

Professionalism Maintenance requires professional knowledge and skills.

Special tools Use professional tools.

Spare parts quality Replace original or certified spare parts.

Cleanliness Keep the environment and parts clean.

Careful commissioning Ensure that the pump performance meets the requirements.

Maintenance recommendations

Regular maintenance Regularly replace hydraulic oil and check the filter.

Avoid overload Avoid long-term overload operation of the pump.

Pay attention to cooling Ensure that the pump has good cooling conditions.

Professional maintenance Regular inspection and maintenance by professionals.

Features of A10VSO100 pumps made in China

Price advantage Compared with imported brands, the price is more competitive.

Short delivery cycle Meet the domestic market's demand for delivery speed.

Perfect technical support Many domestic hydraulic equipment manufacturers provide perfect technical support.

Product quality varies Due to the large number of manufacturers, there are differences in product quality.

Purchase recommendations

Choose qualified manufacturers Choose manufacturers with production qualifications and good reputation.

Understand product parameters Understand the flow, pressure, speed and other parameters of the pump in detail to ensure that it meets the use requirements.

Request relevant certificates Request product certificates, test reports, etc.

After-sales service Understand the manufacturer's after-sales service policy to ensure timely support during use.

Summary

The A10VSO100 pump made in China occupies an important position in the domestic market. Its price advantage and short delivery cycle are favored by users. However, when choosing and using it, you need to pay attention to the difference in product quality and choose a reliable supplier.

Elephant Fluid Power specializes in the production of

Rexroth A2F, A2FM.A2FE, A2FO, A10VO, A4VSO, A4VTG, A4VG, A11VO series

Sauer SPV, MF, 90R, 90L, 90, KRR, FRR, JRR, ERR, MPV, MPT series

Kawasaki K3V, K5V series

Parker F11, F12

NACHI PVD-0B, PVD-00B, PVD-1B, PVD-2B, PVD-3B series

Elephant Fluid Power is a leading manufacturer and distributor of hydraulic components, we produce the most complete hydraulic

motor, hydraulic steering unit, directional control valve, gear pump, piston pump, vane pump, spare parts, etc.

We are committed to creating the highest end quality and after-sales service.

www.heavyequipmentmaintain.com