Elephant Fluid Power Co., Ltd.
Elephant Fluid Power Co., Ltd.

Kawasaki Hydraulic Pump Adjustment

The kawasaki hydraulic pump, a high-quality hydraulic pump that many will admire, has been on the Elephant Fluid Power sales list for many years, and its powerful operating performance and breathtaking long-lasting construction ability are deeply rooted in the hearts of the people. Kawasaki hydraulic pump is widely used, many machines are installed on this hydraulic pump, but when the machine construction more than 10,000 hours, high-intensity construction pressure will make the machine face a series of problems such as hydraulic pump flow adjustment, the problem has also become a more anxious and anxious event in the minds of consumers, so today we will take a look at how to quickly and accurately adjust the hydraulic pump flow.


First of all, we must be familiar with the principle of hydraulic pump to provide pressure, hydraulic pump to provide pressure oil, to supply the drive motor, cylinder and other hydraulic components, the output shaft through the hydraulic pump plunger and the cylinder block of each pump connection, when the output shaft and the cylinder body rotate together, the plunger moves in the cylinder block, sucks in and discharges the hydraulic oil. The increase or decrease of the main pump flow rate is the need to change the cylinder inclination angle to achieve, simply put, is to let the plunger stroke according to the change of the inclination angle, to achieve increase or decrease, while through the servo piston operation principle, up and down to change the inclination angle of the cylinder body.


1. How to adjust the maximum flow of kawasaki hydraulic pump parts:

As shown, we need to first loosen the regulator lock nut and adjust the screw at the same time, keeping in mind that the direction of adjustment is adjusted clockwise to increase the flow rate and counterclockwise adjusted to reduce the flow rate. During the adjustment process, it should be noted that when adjusting the maximum flow, the adjustment screw cannot be greater than 2 turns.


2. kawasaki hydraulic pump minimum flow adjustment method:

First release the regulator lock nut and adjust the screw, the direction of adjustment is to remember to adjust clockwise to reduce the flow rate, counterclockwise to increase the flow rate. During the adjustment process, it is necessary to pay attention to adjusting the minimum flow, and it is required to turn the adjustment screw not more than 2 turns.


At this time, it should be noted that: First, the rotation of the adjustment screw shall not be greater than 1 turn; The second is to observe the change of engine power while turning the adjustment screw, and then tighten and lock all nuts after adjusting appropriately.


After reading the above article, everyone should have an understanding of the process of kawasaki hydraulic pump traffic adjustment, if your product is currently in urgent need of adjusting traffic, then you may wish to start trying to adjust.


Of course, we must also warmly remind all friends that adjusting the hydraulic pump is not as easy as replacing the maintenance parts, and the entire adjustment process must be accurate, so if you do not have any maintenance experience, it is best to carry out under the guidance of professional and technical personnel, so as not to cause unnecessary failures due to wrong operation!


Elephant Fluid Power produces and sells a large number of kawasaki hydraulic pumps and related accessories, we produce products that are not only of good quality, affordable, complete types, but most importantly, all products have a warranty period of up to one year, during which we can not only answer your questions, but also provide you with technical support, if you are still worried about the adjustment of the hydraulic pump, you may wish to contact Elephant Fluid Power, let professional people do professional things, do more with less!




kawasaki hydraulic pump distributors

kawasaki hydraulic pump usa

kawasaki hydraulic pump repair manual

kawasaki hydraulics distributors

kawasaki hydraulic pump parts

kawasaki pumps usa

kawasaki hydraulics usa

kawasaki hydraulics plymouth